ISO Approved SS UNS N08904 Sheet, Grade 904L Steel Plates Manufacturer In India

Stainless Steel 904L Plate is made up of a non – stabilized austenitic stainless steel. The material has low carbon content and sulfur addition. This special composition makes the SS 904L Plates to have high resistance against reducing acids, especially the sulfuric acid. DMFPL is a leading manufacturer and supplier of the Grade 904L Steel Plates in different types and forms. The material is corrosion resistant to pitting, cracking and crevice corrosions. It has good weldability, excellent formability and toughness. The 904L Stainless Steel Coils are also used in applications for these high mechanical properties of the material along with the corrosion resistance. The material however is expensive due to the composition of the 904L Stainless Steel Sheets. The composition includes carbon, manganese, silicon, phosphorus, sulfur, chromium, molybdenum, nickel and copper. Nowadays, the Alloy 904L Coils and sheets are mostly replaced with suitable duplex grades; mostly 2205.

There are different finishes to the plates such as the ASTM A240 SS 904L Chequered Plate and polished plates. The material is strong with 220MPa minimum yield strength and 490MPa minimum tensile strength. The SS 904L Cold Rolled Plate also has a good hardness. The Brinell hardness value of the material is 150. The material could be heat treated at temperatures above 1090 degrees Celsius. However, the SS 904L High Quality Plates can only operate up to 400 degrees Celsius of temperature. At temperatures exceeding this limit, the structural stability is lost. The SS 904L CR Steel Plates can be fabricated and welded easily. The sheets and plates are used in electrostatic applications, oil refineries, seawater cooling systems, pulp and paper industry, acetic production plants, phosphoric acid and sulfuric acid processing plants and so on. Please contact us for 904L Stainless Steel Shim Sheets or any other forms of these plates and any custom orders.

SS 904L Plates Material Standards And Grades

Specifications ASTM B677 / B673 / B674, ASTM A240, ASTM A240M, ASTM A480, ASTM A480M, ASTM B625 / ASME SB625
Condition Cold Drawn & Polished Cold Drawn, Centreless Ground & Polished
Dimensions ASTM, ASME and API
Hardness Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Size 1000 milimeter x 2000 milimeter, 1220 milimeter x 2440 milimeter, 4' x 8', 1250 milimeter x 2500 milimeter, 1500 milimeter x 3000 milimeter to 6000 milimeter, 2000 milimeter x 4000 milimeter to 6000 milimeter
Thickness 4.0 milimeter - 100 milimeter
Range 5 milimeter To 150 milimeter
End Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Specialize Shim Sheet, Perforated Sheet, B. Q. Profile.
Form Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange)

Manufacturer Of 904L Stainless Steel Coils, Specifications Of UNS N08904 Plates, Check the Market price before you buy 904L Stainless Steel Sheets In India.

Alloy 904L Coils Equivalent Grades

STANDARD AFNOR WERKSTOFF NR. BS UNS KS JIS EN
SS 904L Z2 NCDU 25-20 1.4539 904S13 N08904 STS 317J5L SUS 890L X1NiCrMoCu25-20-5

Grade 904L Steel Plates Chemical Resistance Guide

Chemical And Mechanical Composition Of Alloy 904L Coils, ASTM A240 SS 904l Chequered Plate Stockist In India, Check Our Global Sales Network For SS 904l Cold Rolled Plate.

Grade P C Cr Mn MO CU Si S Ni
904L Min - - 19.0 - 4.00 1.00 - - 23.00
max 0.045 0.20 23.0 2.00 5.00 2.00 1.00 0.035 28.00

TP904L Stainless Steel Plates Mechanical Properties Database

Grade Elongational % Tensile Strength Yield Strength Hardness
Rockwell B (HR B) Brinell (HB)
904L 35 490 220 70-90 typical -

List Of Stainless Steel 904L Plate Types

Buy 904L Stainless Steel Plates Fast Delivery, We provide SS 904l High Quality Plates In-House Cutting, Check the Market price before you buy SS 904l Cr Steel Plates, TP904L Stainless Steel Plates Manufacturer In India.
SS 904L Plates SS 904L Plates
Grade 904L Steel Plates Grade 904L Steel Plates
904L Stainless Steel Coils 904L Stainless Steel Coils
UNS N08904 Plates UNS N08904 Plates
904L Stainless Steel Sheets 904L Stainless Steel Sheets
Alloy 904L Coils Alloy 904L Coils
ASTM A240 SS 904l Chequered Plate ASTM A240 SS 904l Chequered Plate
SS 904l Cold Rolled Plate SS 904l Cold Rolled Plate
904L Stainless Steel Plates 904L Stainless Steel Plates
SS 904l High Quality Plates SS 904l High Quality Plates
SS 904l Cr Steel Plates SS 904l Cr Steel Plates
TP904L Stainless Steel Plates TP904L Stainless Steel Plates

ASTM A240 SS 904L Plates Physical properties

Buy 904l Stainless Steel Shim Sheets Certified & Tested Materials, We provide Multiple Payment Options Of Stainless Steel 904L Plate, Physical Properties Of ASTM A240 SS 904L Plates, DIN 1.4539 SS Chequered Plate.

Grade
Specific Heat 0-100°C
(J/kg.K)
Density
(kg/m3)
Elec Resistivity
(nΩ.m)
Elastic Modulus
(GPa)
Mean Co-eff of Thermal Expansion (µm/m/°C) Thermal Conductivity
(W/m.K)
0-315°C 0-100°C 0-538°C At 500°C At 20°C
904L 500 8000 850 200 - 15 - - 13

Stainless Steel 904L Sheets, Plates & Coils Finishes As Per ASTM A240M

Surface Finish Definition Application
2B Those finished, after cold rolling, by heat treatment, pickling or other equivalent treatment and lastly by cold rolling to given appropriate luster. Medical equipment, Food industry, Construction material, Kitchen utensils.
BA Those processed with bright heat treatment after cold rolling. Kitchen utensils, Electric equipment, Building construction.
NO.3 Those finished by polishing with No.100 to No.120 abrasives specified in JIS R6001. Kitchen utensils, Building construction.
NO.4 Those finished by polishing with No.150 to No.180 abrasives specified in JIS R6001. Kitchen utensils, Building construction, Medical equipment.
HL Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size. Building Construction.
NO.1 The surface finished by heat treatment and pickling or processes corresponding there to after hot rolling. Chemical tank, pipe

904L Stainless Steel Sheet Tolerances

Gauge LB/Sq. Ft. LB/Sq In. Gauge Tolerance
72″ Wide 96″ Wide
3/16 0.1875 8.579 0.05958 +.045″ -.010″ +.050″ -.010″
7/32 0.2187 9.870 0.06854
1/4 0.2500 11.162 0.07750
5/16 0.3125 13.746 0.09546
3/8 0.3750 16.496 0.11456 +.055″ -.010″ +.060″ -.010″
7/16 0.4375 19.080 0.13250
1/2 0.5000 21.633 0.15044
9/16 0.5625 24.247 0.16838
5/8 0.6250 26.831 0.18633
11/16 0.6875 29.415 0.20427
3/4 0.7500 32.123 0.22308 +.060″ -.010″ +.065″ -.010″
13/16 0.8125 34.707 0.24102
7/8 0.8750 37.291 0.25897
15/16 0.9375 39.875 0.27691
1 1.0000 42.665 0.29628 +.070″ -.010″ +.075 -.010″
1-1/8 1.1250 47.833 0.33217
1-1/4 1.2500 53.001 0.36806
1-3/8 1.3750 58.169 0.40395
1-1/2 1.5000 63.337 0.43984
1-3/4 1.7500 73.672 0.51161
2 2.0000 84.008 0.58339 +.125″ -.010″ +.150″ -.010″
2-1/8 2.1250 89.610 0.62229
2-1/4 2.2500 94.777 0.65817
2-1/2 2.5000 105.113 0.72995
2-3/4 2.7500 115.449 0.80173
3 3.0000 126.301 0.87709 +.150″ -.010″ +.160″ -.010″
3-1/2 3.5000 146.972 1.02064
4 4.0000 168.264 1.16850 +.180″ -.010″ +.200″ -.010

Stainless Steel Sheet 904L Gauges


NOMINAL DECIMAL
STANDARD VARIANCE FROM
SHEET METAL GAUGE (APPROXIMATE INCHES) NOMINAL DECIMAL  (+/- INCHES)
7 0.1793 0.0080
8 0.1644 0.0080
9 0.1495 0.0080
10 0.1345 0.0070
11 0.1196 0.0050
12 0.1046 0.0050
13 0.0897 0.0050
14 0.0747 0.0040
15 0.0673 0.0040
16 0.0598 0.0030
17 0.0538 0.0030
18 0.0478 0.0030
19 0.0418 0.0030
20 0.0359 0.0030
21 0.0329 0.0025
22 0.0299 0.0020
23 0.0269 0.0020
24 0.0239 0.0020
25 0.0209 0.0015
26 0.0179 0.0015
28 0.0149 0.0010

AISI 904L Sheet Sizes

Thickness (in) Thickness (mm) Max Width (in) Max Width (mm) Weight (Lbs per Feet) Weight (Kilos per m2)
0.187 4.7498 24 609.6 7.5398 36.8168
0.165 4.191 24 609.6 6.6528 32.4856
0.125 3.175 24 609.6 5.04 24.6103
0.105 2.667 24 609.6 4.2336 20.6727
0.09 2.286 24 609.6 3.6288 17.7194
0.062 1.5748 24 609.6 2.4998 12.2065
0.059 1.4986 24 609.6 2.3789 11.6162
0.055 1.397 24 609.6 2.2176 10.8285
0.05 1.27 24 609.6 2.016 9.8441
0.045 1.143 24 609.6 1.8144 8.8597
0.042 1.0668 24 609.6 1.6934 8.2689
0.04 1.016 24 609.6 1.6128 7.8753
0.035 0.889 24 609.6 1.4112 6.8909
0.032 0.8128 24 609.6 1.2902 6.3
0.03 0.762 24 609.6 1.2096 5.9065
0.025 0.635 24 609.6 1.008 4.9221
0.022 0.5588 24 609.6 0.887 4.3312
0.02 0.508 24 609.6 0.8064 3.9377
0.018 0.4572 24 609.6 0.7258 3.5441
0.016 0.4064 24 609.6 0.6451 3.15
0.015 0.381 24 609.6 0.6048 2.9532
0.014 0.3556 24 609.6 0.5645 2.7565
0.012 0.3048 24 609.6 0.4838 2.3624
0.01 0.254 24 609.6 0.4032 1.9688
0.008 0.2032 12 304.8 0.3226 1.5753
0.006 0.1524 12 304.8 0.2419 1.1812
0.005 0.127 12 304.8 0.2016 0.9844

SS 904L Sheet Weight Per Unit

Thickness Plate Weight per Unit Area Density
3/16 inches 0.06000 lbs/in²42.184176 kg/m² 0.315 lbs/in³8.72 g/cm³
1/4 inches 0.08 lbs/in²56.245568 kg/m² 0.315 lbs/in³8.72 g/cm³
3/8 inches 0.121 lbs/in²85.0714216 kg/m² 0.315 lbs/in³8.72 g/cm³
1/2 inches 0.161 lbs/in²113.1942056 kg/m² 0.315 lbs/in³8.72 g/cm³
5/8 inches 0.196 lbs/in²137.8016416 kg/m² 0.315 lbs/in³8.72 g/cm³
3/4 inches 0.235 lbs/in²165.221356 kg/m² 0.315 lbs/in³8.72 g/cm³
7/8 inches 0.274 lbs/in²192.6410704 kg/m² 0.315 lbs/in³8.72 g/cm³
1 inches 0.313 lbs/in²220.0607848 kg/m² 0.315 lbs/in³8.72 g/cm³
1 1/4 inches 0.391 lbs/in²274.9002136 kg/m² 0.315 lbs/in³8.72 g/cm³
1 1/2 inches 0.47 lbs/in²330.442712 kg/m² 0.315 lbs/in³8.72 g/cm³
1 3/4 inches 0.549 lbs/in²385.9852104 kg/m² 0.315 lbs/in³8.72 g/cm³
2 inches 0.627 lbs/in²440.8246392 kg/m² 0.315 lbs/in³8.72 g/cm³
2 1/4 inches 0.705 lbs/in²495.664068 kg/m² 0.315 lbs/in³8.72 g/cm³
2 1/2 inches 0.784 lbs/in²551.2065664 kg/m² 0.315 lbs/in³8.72 g/cm³
2 3/4 inches 0.862 lbs/in²606.0459952 kg/m² 0.315 lbs/in³8.72 g/cm³
3 inches 0.941 lbs/in²661.5884936 kg/m² 0.315 lbs/in³8.72 g/cm³

904L Stainless Steel Diamond Sheet Weight Chart

Gauge Pattern Sizes Available: Wt per Sheet Grades Available: Pattern
1/8
6.149/# SQF
48 x 96 197
48 x 120 246 316/316/L/410
48 x 144 295
3/16
8.698/# SQF
36 x 96 209 304 Pattern B
36 x 120 261 304L Pattern B
36 x 144 313 316/L/410 Pattern B
48 x 96 278
48 x 120 348
48 x 144 418
60 x 96 348
60 x 120 435
60 x 144 522
60 x 240 870
1/4
11.247/# SQF
36 x 96 270 304 Pattern B
36 x 120 337 304L Pattern B
36 x 144 405 316/L/410 Pattern B
48 x 96 360
48 x 120 450
48 x 144 540
48 x 240 900
60 x 96 450
60 x 120 562
60 x 144 675
60 x 240 1125
3/8
16.600/# SQF
48 x 96 531 304 Pattern B
48 x 120 664 304L Pattern B
48 x 144 797 316/L/410 Pattern B

Thicknesses For Alloy 904L Stainless Steel Sheet

3/16″ 4.8mm
1/4″ 6.3mm
3/8″ 9.5mm
1/2″ 12.7mm
5/8″ 15.9mm
3/4″ 19mm
1″ 25.4mm
1 1/4″ 31.8mm
1 1/2″ 38.1mm
1 3/4″ 44.5mm
2″ 50.8mm

ASTM A240 Stainless Steel 904L Plate Metric Dimensions

Plate Surface finish Thickness (mm) Width (max mm)
2B – Cold rolled, heat treated, pickled, skin passed plate 0.25–8.0 2032
2D – Cold rolled, heat treated, pickled plate 0.4–6.35 1524
2E – Cold rolled, heat treated, mechanically descaled plate 0.4–8.0 2032
2R – Cold rolled, bright annealed plate 0.25–3.5 1524
2H – Work hardened plate 0.4–6.35 1524
Polished, brushed plate 0.5–4.0 1524

Imperial Dimensions of ASTM A240 Stainless Steel 904L Plate

Plate Surface finish Gauge (in) Width (max in)
2B – Cold rolled, heat treated, pickled, skin passed Plate 10–24 72*
2D – Cold rolled, heat treated, pickled plate 12–24 60
BA Mexinox only 18–28 48
Polished plate (not brushed) 11–24 60
Temper rolled plate Mexinox only 13–29 48

Stainless Steel Sheets -Type 904L | No. 2B Finish — Cold Rolled, Annealed

Stainless Steel Gauge, Width and Length Weight
Lbs. per Sq Ft.
Est. Wt. per Sheet
7GA (.1874")
48 x 96 7.871 251.9
48 x 120 7.871 314.8
48 x 144 7.871 377.8
10GA (.135”)
36 x 120 5.670 170.1
48 x 96 5.670 181.4
48 x 120 5.670 226.8
60 x 120*
5.670 283.5
60 x 144*
5.670 340.2
72 x 120* 5.670 340.2
11 GA (.120")
36 x 96 5.040 121.0
36 x 120 5.040 151.2
36 x 144 5.040 181.4
48 x 96 5.040 161.3
48 x 120 5.040 201.6
48 x 144 5.040 241.9
60 x 120 5.040 252.0
60 x 144 5.040 302.4
72 x 120* 5.040 302.4
72 x 144* 5.040 362.9
12 Ga. (.105")
36 x 96 4.410 105.8
36 x 120 4.410 132.3
36 x 144 4.410 158.8
42 x 120 4.410 154.4
48 x 96 4.410 141.1
48 x 120 4.410 176.4
48 x 144 4.410 211.7
60 x 96 4.410 176.4
60 x 120 4.410 220.5
60 x 144 4.410 264.6
72 x 120* 4.410 264.6
72 x 144 4.410 317.5
13 Ga (.090")
36 x 96 3.780 90.72
36 x 120 3.780 113.4
48 x 120 3.780 151.2
14 Ga. (.075")
30 x 120 3.150 78.75
36 x 96 3.150 75.60
36 x 120 3.150 94.50
36 x 144 3.150 113.4
42 x 120 3.150 110.3
42 x 144 3.150 132.3
48 x 96 3.150 100.8
48 x 120 3.150 126.0
48 x 144 3.150 151.2
60 x 120 3.150 157.5
60 x 144 3.150 189.0
72 x 120 3.150 189.0
72 x 144 3.150 226.8
16 Ga. (.060")
30 x 96 2.520 50.40
30 x 120 2.520 63.00
36 x 96 2.520 60.48
36 x 120 2.520 75.60
36 x 144 2.520 90.72
42 x 120 2.520 88.20
48 x 96 2.520 80.64
48 x 120 2.520 100.8
48 x 144 2.520 121.0
60 x 96 2.520 100.8
60 x 120 2.520 126.0
60 x 144 2.520 151.2
18 Ga. (.048")
30 x 96 2.016 40.32
30 x 120 2.016 50.40
36 x 96 2.016 48.38
36 x 120 2.016 60.48
36 x 144 2.016 72.58
42 x 120 2.016 70.56
48 x 96 2.016 64.51
48 x 120 2.016 80.64
48 x 144 2.016 96.77
60 x 120 2.016 100.8
60 x 144 2.016 121.0
19 Ga. (.042")
36 x 120 1.764 52.92
20 Ga. (.036")
30 x 96 1.512 30.24
30 x 120 1.512 37.80
36 x 96 1.512 36.29
36 x 120 1.512 45.36
36 x 144 1.512 54.43
42 x 120 1.512 52.92
48 x 96 1.512 48.38
48 x 120 1.512 60.48
48 x 144 1.512 72.58
22 Ga. (.030")
30 x 96 1.260 25.20
30 x 120 1.260 61.50
36 x 96 1.260 30.24
36 x 120 1.260 37.80
36 x 144 1.260 45.36
48 x 96 1.260 40.32
48 x 120 1.260 50.40
24 Ga. (.024")
30 x 96 1.008 20.16
30 x 120 1.008 25.20
36 x 96 1.008 24.19
36 x 120 1.008 30.24
48 x 96 1.008 32.26
48 x 120 1.008 40.32
26 Ga. (.018")
30 x 96 .7560 15.12
30 x 120 .7560 18.90
36 x 96 .7560 18.14
36 x 120 .7560 22.68
48 x 96 .7560 24.1
48 x 120 .7560 30.24
28 Ga. (.015")
36 x 96 .630 15.12
36 x 120 .630 18.90

Type 904L – Flattened | Long Way Of Diamond Runs Parallel To Length Of Sheet

Style Designation Size in Inches Wt. per Sq. Ft. in Lbs. Wt. Per Sheet
3/4__9 48 x 96 1.95 62.4
1/2__13 48 x 96 1.78 56.9
1/2__16 48 x 96 0.86 27.5
1/2__18 48 x 96 0.69 22.1
1-1/2__9 48 x 96 1.31 41.9
3/4__13 48 x 96 0.86 27.5
3/4__16 48 x 96 0.57 18.2
3/4__18 48 x 96 0.46 14.7
1-1/2__13 48 x 96 0.65 20.8

Perforated Stainless Steel Sheet 904L

Hole Dia mm Hole Centres mm O/A Finish Tck mm Full Sheet Size mm
0.75 1.5 23% 2B 0.6 2000 x 1000
1 2 23% 2B 1.0 2000 x 1000
1.5 2.6 30% 2B 1.0 2000 x 1000
2 3.5 30% 2B 1.0 2000 x 1000
2 3.5 30% 2B 1.0 2000 x 1000
3 5 33% 2B 1.0 2000 x 1000
4 5.6 46% 2B 1.0 2000 x 1000
5 8 35% 2B 1.0 2000 x 1000
6 8 51% 2B 1.0 2000 x 1000
8 10 58% 2B 1,0 2000 x 1000

Plain & Polished 904L Stainless Steel Sheet

PRODUCT FINISH THICKNESS MM MAX SHEET SIZE MM
Grade 410 Plain 2B 0.9 2000 x 1000
Bright 0.9 2000 x 1000
Brushed Finish 0.9, 1.2 2000 x 1000, 2500 x 1250
Rimex Super Mirror 0.8, 1.2 2400 x 1200, 2500 x 1250
Embossed 0.8, 1.0 2500 x 1250
 
Process/Equipment Product Size Range General information
Polishing All product shapes Light Gauge Sheet through Heavy Gauge Plate #4 Polish, #6 Polish, #8 Mirror, or per customer specification or sample
Blanchard Grinding Plate All Plate Sizes All plate inventory can be cut to size, and then ground to your tolerance and flatness specifications.
Gauer Processing Plate We offer Gauer processing for size ranges up to 5/8 thick, 8 wide, and 20′ length
Stainless steel sheared and edged bar can be gauer processed from 3/16 thick thru 5/8 thick up to 8 wide.
Tolerances vary by grade and thickness
Sheet leveling Sheet 26 gauge to 7 gauge, 24 length to 92 length Coil Widths available = 36, 48, 60, 72
Plate Leveling Plate 3/16 through 3/8 thickness, 24 though 380 length, up to 78 wide
In house plate leveling of coil from 13 gauge stainless sheet thru 3/8 stainless plate coil, thru 78.75 wide (2 meter)
Coil Widths available = 36, 48, 60, 72

Stainless Steel 904L Plate Processing

Equipment Size Range Standard Internal Tolerances
(Inch)
Dynamic Waterjet 20 Gauge sheets through 8 inch thickness range,  Our two largest table sizes are:  124x 241 and 78.8” X 305.5” Part tolerances of ±.030” is standard.  Tolerances of ±.005” can be provided.  Tolerances may vary depending on thickness
Plasma Up to 6.25 thickness,  Plasma Table Size = 10ft X 65ft.
904L Stainless steel Sheet can be plasma cut from 3/16 thick thru 6.25 thick.
Varies by thickness. State of the art equipment enables significantly better tolerances than older plasma technologies.
Saw Cutting (Kasto Saws, Hem Saws, and Abrasive saws) 3/8 to 26 thickness range.We can saw cut stainless steel Sheet up to 280 length
904L Stainless steel Sheet or bar from 1/2 thick thru 22 thick stainless steel can be Kasto saw cut.
+1/8 is typical; tolerances may vary depending on grade or thickness., and equipment.
Laser .12 to 1.25 thickness range. Laser table size = 159 X 720 (13.25′ X 60′) ±0.01 to ±0.035 depending on gauge
Plate Shear 3/16 to 3/4 thickness range, Up to 240 length
904L Stainless steel Sheet thru 3/4 thick can be shear cut to size.
+1/8, -0 is typical; Tolerances may vary depending on grade or thickness
Machine Cutting 904L Stainless steel rings and discs can be machine cut from 1/2 thick thru 12 thick, up to 42 in diameter +1/32, -1/32 is typical.  Tolerances may vary depending on grade or thickness
4 Dynamic Waterjet  Tables 904L Stainless steel Sheet can be waterjet cut from light gauge sheet metal thru 8thick 904L stain