Check Availability Of SS 310 Sheets, AISI 310 Plate

Stainless Steel 310 Sheet is made up of a medium carbon austenitic stainless steel. The material is suitable for high temperature services such as furnaces. DMFPL is a leading manufacturer and supplier of the SS 310 Sheets in different scales and quantities. The material can operate up to 1150 degrees Celsius for continuous services. The AISI 310 Plate can operate under 1035 degrees Celsius of temperature for intermittent services. There are low carbon versions and high carbon versions of the same material. The Stainless Steel 310 Plates are used in applications including fuidised bed combustors, refractory anchor bolts, burners, furnace parts and in petroleum and steam boilers. The high temperature tolerant 310 Stainless Steel Hot Rolled Plates are made up of 25% chromium and 20% nickel in the composition. This makes the material resistant to oxidation and corrosion.

The finishing of the material adds to the oxidation resistance as well. There are 310 SS Chequered Plate types and other polished finish types as well. The SS 310 Perforated Sheets are unique in that they allow for aeration and reduce the weight of the sheet. There are different forms of the sheet such as the Stainless Steel 310 Coils, foils, rolls and strips. The material is composed of carbon, manganese, phosphorus, silicon and sulfur in addition to the chromium and nickel. The Stainless Steel 310 Slatting Coils are strong with minimum yield strength of 205MPa and minimum tensile strength of 520MPa.  It is also hard with HV max scale of 225. The SS 310 Plate can also be welded with ease and can be formed well. Machining is also possible on this material. Please contact us for ASME SA240 Stainless Steel 310 Coils and other types of 310 stainless steel products.

SS 310 Sheets Standards And Specifications

Specifications ASTM A240 / ASME SA240
Length 2000 milimeter, 2440 milimeter, 3000 milimeter, 5800 milimeter, 6000 milimeter, etc
Thickness 4 milimeter - 100 milimeter
Finish Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Width
1000 milimeter, 1219 milimeter, 1500 milimeter, 1800 milimeter, 2000 milimeter, 2500 milimeter, 3000 milimeter, 3500 milimeter, etc
Form Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Surface 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand
blast, Brush, etching, etc

Specification Of Stainless Steel 310 Plates, Buy SS UNS S31000 Sheets At Best Price In Delhi, India.

SS SUS 310 Sheets Chemical Composition Standard

Grade S C Mo Mn Cr Si Ni P N
SS 310 0.015 max 0.015 max 0.10 max 2 max 24.00 – 26.00 0.015 max 19.00 – 21.00 0.020 max 54.7 min

AISI 310 Plate Mechanical Properties Chart

Refer 310 Stainless Steel Hot Rolled Plates Chemical Requirements, 310 SS Chequered Plate Mechanical Requirements, Best offer on bulk SS TP310 Sheets stock.

Density Yield Strength (0.2%Offset) Melting Point Elongation Tensile Strength
7.9 g/cm3 Psi – 30000 , MPa – 205 1402 °C (2555 °F) 40 % Psi – 75000 , MPa – 515

List Of Stainless Steel 310 Sheet Types

SS 310 Sheets SS 310 Sheets
AISI 310 Plate AISI 310 Plate
Stainless Steel 310 Plates Stainless Steel 310 Plates
SS UNS S31000 Sheets SS UNS S31000 Sheets
310 Stainless Steel Hot Rolled Plates 310 Stainless Steel Hot Rolled Plates
310 SS Chequered Plate 310 SS Chequered Plate
SS TP310 Sheets SS TP310 Sheets
SS SUS 310 Sheets SS SUS 310 Sheets
SS 310 Perforated Sheets SS 310 Perforated Sheets
1.4841 Plates 1.4841 Plates
Stainless Steel 310 Coils Stainless Steel 310 Coils
Stainless Steel 310 Slatting Coils Stainless Steel 310 Slatting Coils

Equivalent Material Of SS 310 Perforated Sheets

Get SS SUS 310 Sheets At Best Price, Equivalent Grade Of SS 310 Perforated Sheets, Stainless Steel 310 Sheet, We provide 1.4841 Plates Expert Cutting Service In Delhi, India.
STANDARD BS WERKSTOFF NR. GOST UNS AFNOR JIS EN
SS 310 310S24 1.4841 20Ch25N20S2 S31000 SUS 310 X15CrNi25-20

Stainless Steel 310 Plates Thickness

Hot rolled AISI 310 thick plate 20-60 milimeter
Cold rolled Stainless Steel 310 1.4845 thin plate 0.2-4 milimeter
Hot rolled ASTM A240 TP 310 extra thick plate 60-115 milimeter
Hot rolled 310 SS medium plate 4-20 milimeter

310 SS Chequered Plate Physical Properties

Contact us today for buy Stainless Steel 310 Coils In India, Refer Stainless Steel 310 Slatting Coils And SS 310 Plate Chart, Physical Properties Of ASME SA240 Stainless Steel 310 Coils.
Grade Thermal Conductivity(W/m.K) Density (kg/m3) Mean Coefficient of Thermal Expansion (μm/m/°C) Elastic Modulus (GPa) Specific Heat 0-100°C (J/kg.K) Electrical Resistivity (nΩ.m)
at 100°C at 500°C 0-100°C 0-315°C 0-538°C
310/S 14.2 18.7 7750 15.9 16.2 17.0 200 500 720

310 Stainless Steel Plate Possible Alternative Grades

Grade Why it might be chosen instead of 310
3CR12 Heat resistance is needed, but only to about 600°C.
304H Heat resistance is needed, but only to about 800°C.
321 Heat resistance is needed, but only to about 900°C. Subsequent aqueous corrosion resistance also required.
253MA (2111HTR) A slightly higher temperature resistance is needed than can be provided by 310. Better resistance to reducing sulphide atmosphere needed. Higher immunity from sigma phase embrittlement is required.

Stainless Steel 310 Sheets, Plates & Coils Finishes As Per ASTM A240M

Surface Finish Definition Application
2B Those finished, after cold rolling, by heat treatment, pickling or other equivalent treatment and lastly by cold rolling to given appropriate luster. Medical equipment, Food industry, Construction material, Kitchen utensils.
BA Those processed with bright heat treatment after cold rolling. Kitchen utensils, Electric equipment, Building construction.
NO.3 Those finished by polishing with No.100 to No.120 abrasives specified in JIS R6001. Kitchen utensils, Building construction.
NO.4 Those finished by polishing with No.150 to No.180 abrasives specified in JIS R6001. Kitchen utensils, Building construction, Medical equipment.
HL Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size. Building Construction.
NO.1 The surface finished by heat treatment and pickling or processes corresponding there to after hot rolling. Chemical tank, pipe

ASTM A240 Stainless Steel 310 Plate Melting Range

Plate Type Melting Point
Stainless Steel 310 Plate 1402 °C (2555 °F)

ASME SA240 Stainless Steel 310 Plate Density

Plate Type Density
Stainless Steel 310 Plate 7.9 g/cm3

Plain & Polished 310 Stainless Steel Sheet

PRODUCT FINISH THICKNESS MM MAX SHEET SIZE MM
Grade 310 Plain 2B 0.9 2000 x 1000
Bright 0.9 2000 x 1000
Brushed Finish 0.9, 1.2 2000 x 1000, 2500 x 1250
Rimex Super Mirror 0.8, 1.2 2400 x 1200, 2500 x 1250
Embossed 0.8, 1.0 2500 x 1250

circle cutting in ss Grade 310 perforated sheets up to 1000mm diameter

Hole Dia mm Hole Centres mm O/A Finish Tck mm Full Sheet Size mm
0.75 1.5 23% 2B 0.6 2000 x 1000
1 2 23% 2B 1.0 2000 x 1000
1.5 2.6 30% 2B 1.0 2000 x 1000
2 3.5 30% 2B 1.0 2000 x 1000
2 3.5 30% 2B 1.0 2000 x 1000
3 5 33% 2B 1.0 2000 x 1000
4 5.6 46% 2B 1.0 2000 x 1000
5 8 35% 2B 1.0 2000 x 1000
6 8 51% 2B 1.0 2000 x 1000
8 10 58% 2B 1,0 2000 x 1000

ASTM A240 Stainless Steel 310 Plate Metric Dimensions

Plate Surface finish Thickness (mm) Width (max mm)
2B – Cold rolled, heat treated, pickled, skin passed plate 0.25–8.0 2032
2D – Cold rolled, heat treated, pickled plate 0.4–6.35 1524
2E – Cold rolled, heat treated, mechanically descaled plate 0.4–8.0 2032
2R – Cold rolled, bright annealed plate 0.25–3.5 1524
2H – Work hardened plate 0.4–6.35 1524
Polished, brushed plate 0.5–4.0 1524

ASTM A240 Stainless Steel 310 Plate Imperial Dimensions

Plate Surface finish Gauge (in) Width (max in)
2B – Cold rolled, heat treated, pickled, skin passed Plate 10–24 72*
2D – Cold rolled, heat treated, pickled plate 12–24 60
BA Mexinox only 18–28 48
Polished plate (not brushed) 11–24 60
Temper rolled plate Mexinox only 13–29 48

Stainless Steel Sheets -Type 310 | No. 2B Finish — Cold Rolled, Annealed

Stainless Steel Gauge, Width and Length Weight
Lbs. per Sq Ft.
Est. Wt. per Sheet
7GA (.1874")
48 x 96 7.871 251.9
48 x 120 7.871 314.8
48 x 144 7.871 377.8
10GA (.135”)
36 x 120 5.670 170.1
48 x 96 5.670 181.4
48 x 120 5.670 226.8
60 x 120*
5.670 283.5
60 x 144*
5.670 340.2
72 x 120* 5.670 340.2
11 GA (.120")
36 x 96 5.040 121.0
36 x 120 5.040 151.2
36 x 144 5.040 181.4
48 x 96 5.040 161.3
48 x 120 5.040 201.6
48 x 144 5.040 241.9
60 x 120 5.040 252.0
60 x 144 5.040 302.4
72 x 120* 5.040 302.4
72 x 144* 5.040 362.9
12 Ga. (.105")
36 x 96 4.410 105.8
36 x 120 4.410 132.3
36 x 144 4.410 158.8
42 x 120 4.410 154.4
48 x 96 4.410 141.1
48 x 120 4.410 176.4
48 x 144 4.410 211.7
60 x 96 4.410 176.4
60 x 120 4.410 220.5
60 x 144 4.410 264.6
72 x 120* 4.410 264.6
72 x 144 4.410 317.5
13 Ga (.090")
36 x 96 3.780 90.72
36 x 120 3.780 113.4
48 x 120 3.780 151.2
14 Ga. (.075")
30 x 120 3.150 78.75
36 x 96 3.150 75.60
36 x 120 3.150 94.50
36 x 144 3.150 113.4
42 x 120 3.150 110.3
42 x 144 3.150 132.3
48 x 96 3.150 100.8
48 x 120 3.150 126.0
48 x 144 3.150 151.2
60 x 120 3.150 157.5
60 x 144 3.150 189.0
72 x 120 3.150 189.0
72 x 144 3.150 226.8
16 Ga. (.060")
30 x 96 2.520 50.40
30 x 120 2.520 63.00
36 x 96 2.520 60.48
36 x 120 2.520 75.60
36 x 144 2.520 90.72
42 x 120 2.520 88.20
48 x 96 2.520 80.64
48 x 120 2.520 100.8
48 x 144 2.520 121.0
60 x 96 2.520 100.8
60 x 120 2.520 126.0
60 x 144 2.520 151.2
18 Ga. (.048")
30 x 96 2.016 40.32
30 x 120 2.016 50.40
36 x 96 2.016 48.38
36 x 120 2.016 60.48
36 x 144 2.016 72.58
42 x 120 2.016 70.56
48 x 96 2.016 64.51
48 x 120 2.016 80.64
48 x 144 2.016 96.77
60 x 120 2.016 100.8
60 x 144 2.016 121.0
19 Ga. (.042")
36 x 120 1.764 52.92
20 Ga. (.036")
30 x 96 1.512 30.24
30 x 120 1.512 37.80
36 x 96 1.512 36.29
36 x 120 1.512 45.36
36 x 144 1.512 54.43
42 x 120 1.512 52.92
48 x 96 1.512 48.38
48 x 120 1.512 60.48
48 x 144 1.512 72.58
22 Ga. (.030")
30 x 96 1.260 25.20
30 x 120 1.260 61.50
36 x 96 1.260 30.24
36 x 120 1.260 37.80
36 x 144 1.260 45.36
48 x 96 1.260 40.32
48 x 120 1.260 50.40
24 Ga. (.024")
30 x 96 1.008 20.16
30 x 120 1.008 25.20
36 x 96 1.008 24.19
36 x 120 1.008 30.24
48 x 96 1.008 32.26
48 x 120 1.008 40.32
26 Ga. (.018")
30 x 96 .7560 15.12
30 x 120 .7560 18.90
36 x 96 .7560 18.14
36 x 120 .7560 22.68
48 x 96 .7560 24.1
48 x 120 .7560 30.24
28 Ga. (.015")
36 x 96 .630 15.12
36 x 120 .630 18.90

Type 310 – Flattened | Long Way Of Diamond Runs Parallel To Length Of Sheet

Style Designation Size in Inches Wt. per Sq. Ft. in Lbs. Wt. Per Sheet
3/4__9 48 x 96 1.95 62.4
1/2__13 48 x 96 1.78 56.9
1/2__16 48 x 96 0.86 27.5
1/2__18 48 x 96 0.69 22.1
1-1/2__9 48 x 96 1.31 41.9
3/4__13 48 x 96 0.86 27.5
3/4__16 48 x 96 0.57 18.2
3/4__18 48 x 96 0.46 14.7
1-1/2__13 48 x 96 0.65 20.8

SS 310 Plate Weight Per Unit

Thickness Plate Weight per Unit Area Density
3/16 inches 0.06000 lbs/in²42.184176 kg/m² 0.315 lbs/in³8.72 g/cm³
1/4 inches 0.08 lbs/in²56.245568 kg/m² 0.315 lbs/in³8.72 g/cm³
3/8 inches 0.121 lbs/in²85.0714216 kg/m² 0.315 lbs/in³8.72 g/cm³
1/2 inches 0.161 lbs/in²113.1942056 kg/m² 0.315 lbs/in³8.72 g/cm³
5/8 inches 0.196 lbs/in²137.8016416 kg/m² 0.315 lbs/in³8.72 g/cm³
3/4 inches 0.235 lbs/in²165.221356 kg/m² 0.315 lbs/in³8.72 g/cm³
7/8 inches 0.274 lbs/in²192.6410704 kg/m² 0.315 lbs/in³8.72 g/cm³
1 inches 0.313 lbs/in²220.0607848 kg/m² 0.315 lbs/in³8.72 g/cm³
1 1/4 inches 0.391 lbs/in²274.9002136 kg/m² 0.315 lbs/in³8.72 g/cm³
1 1/2 inches 0.47 lbs/in²330.442712 kg/m² 0.315 lbs/in³8.72 g/cm³
1 3/4 inches 0.549 lbs/in²385.9852104 kg/m² 0.315 lbs/in³8.72 g/cm³
2 inches 0.627 lbs/in²440.8246392 kg/m² 0.315 lbs/in³8.72 g/cm³
2 1/4 inches 0.705 lbs/in²495.664068 kg/m² 0.315 lbs/in³8.72 g/cm³
2 1/2 inches 0.784 lbs/in²551.2065664 kg/m² 0.315 lbs/in³8.72 g/cm³
2 3/4 inches 0.862 lbs/in²606.0459952 kg/m² 0.315 lbs/in³8.72 g/cm³
3 inches 0.941 lbs/in²661.5884936 kg/m² 0.315 lbs/in³8.72 g/cm³

SS UNS S31000 Plate Sizes

Size (in Inches) Size (in mm)
.125" .875" 3.18 22.2
.134" 1" 3.40 25.4
.156" 1.125" 3.96 28.6
.187" 1.250" 4.75 31.8
.250" 1.500" 6.35 38.1
.312" 1.750" 7.92 44.5
.375" 2" 9.53 50.8
.500" 2.500" 12.7 63.5
.625" 3" 15.9 76.2
.750"   19.1  

Stainless Steel 310 Sheet , Plate & Coil Thickness

0.6 mm  0.8 mm 
1.0 mm  1.2 mm 
1.5 mm  1.6 mm 
1.8 mm  2.0 mm 
3.0 mm  4.0 mm 
5.0 mm  6.0 mm 
8.0 mm  10.0 mm 
12.0 mm  15.0 mm 
20.0 mm  25.4 mm
Thickness (in mm)
0.004, Temper: As rolled 0.2, Temper: Annealed
0.005, Temper: As rolled 0.2, Temper: Half hard
0.0065, Temper: As rolled 0.25, Temper: Annealed
0.0076, Temper: As rolled 0.25, Temper: Half hard
0.01, Temper: As rolled 0.30, Coil width: 15.5, Temper: Half hard
0.02, Temper: As rolled 0.38, Temper: Annealed
0.02, Temper: Half hard 0.5, Temper: Half hard
0.025, Temper: As rolled, Condition: Surface oxide 0.75, Temper: Half hard
0.025, Temper: As rolled 1.0, Temper: Annealed
0.05, Temper: Half hard 2.0, Temper: 1/4 Hard
0.05, Temper: Quarter hard 2.0, Temper: Half hard
0.075, Temper: Half hard 3.0, Temper: Annealed
0.1, Temper: Half hard 3.0, Temper: 1/4 Hard
0.1, Coil width: 10, Temper: Half hard 6.35, Temper: Hard
0.125, Temper: Half hard 0.15, Coil width: 0.3, Temper: Half hard
0.15, Temper: Half hard  

310 Stainless Steel Sheet Gauges

NOMINAL DECIMAL STANDARD VARIANCE FROM
SHEET METAL GAUGE (APPROXIMATE INCHES) NOMINAL DECIMAL  (+/- INCHES)
7 0.1793 0.0080
8 0.1644 0.0080
9 0.1495 0.0080
10 0.1345 0.0070
11 0.1196 0.0050
12 0.1046 0.0050
13 0.0897 0.0050
14 0.0747 0.0040
15 0.0673 0.0040
16 0.0598 0.0030
17 0.0538 0.0030
18 0.0478 0.0030
19 0.0418 0.0030
20 0.0359 0.0030
21 0.0329 0.0025
22 0.0299 0.0020
23 0.0269 0.0020
24 0.0239 0.0020
25 0.0209 0.0015
26 0.0179 0.0015
28 0.0149 0.0010

Effect Of Exposure At 480 – 650º On Room Temperature Toughness And Hardness

Temperature °C Exposure Time
1,000 hours 10,000 hours
Charpy Impact Hardness Charpy Impact Hardness
J HB J HB
Unexposed 102 124 102 124
480 119 84 152
565 65 119 39 174
650 39 130 3 269

Stainless Steel 310 Plate Processing

Stainless Steel 310 Plate Processing Options
2 Plasma Cutting Tables Stainless Steel 310 plate can be plasma cut from 3/16″ thick thru 6.25″ thick.
4 Dynamic Waterjet  Tables Stainless Steel 310 plate can be waterjet cut from light gauge sheet metal thru 8″ thick Stainless 310 Plate.
4 Kasto Plate Saws Stainless Steel 310 plate or bar from 1/2″ thick thru 22″ thick Stainless Steel 310 can be Kasto saw cut.
1 plate laser Stainless Steel 310 sheet gauges thru 1-1/8″ thick Stainless Steel 310 plate can be laser cut.
3 Plate Shears Stainless Steel 310 plate thru 3/4″ thick can be shear cut to size.
Gauer Processing Stainless Steel 310 sheared and edged bar can be gauer processed from 3/16″ thick thru 5/8″ thick up to 8″ wide.
Machine Cutting Stainless Steel 310 rings and discs can be machine cut from 1/2″ thick thru 12″ thick, up to 42″ in diameter
Stainless 310 Plate Leveling In house plate leveling of coil from 13 gauge stainless sheet thru 3/8″ Stainless 310 Plate coil, thru 78.75″ wide (2 meter)