ISO Approved Stainless Steel 304L Plates, SS 1.4307 Sheet Manufacturer In India

Stainless Steel 304L Sheet is a low carbon variation of the 18/8 stainless steel sheets. It is an austenitic grade of stainless steel and is used mostly. The Stainless Steel 304L Plates are corrosion resistant to mild environmental conditions but are prone to pitting and crevice corrosion. DMFPL is a leading manufacturer and supplier of these plates in larger quantities. The plates range in dimensions. There are other forms such as the Stainless Steel 304L Slatting Coil, strip and foils in this material. It has high tensile strength and yield strength. The minimum yield strength is 205MPa and the minimum tensile strength is 515MPa. The SS 304L Coils are used in high temperature services. The material can operate up to 870 degrees Celsius for intermittent services and up to 925 degrees Celsius for continuous services. However, the use of AISI 304L Plate in high temperatures is limited by the aqueous nature of the ingredients.

The plate is poor in crevice and pitting resistance so it is not recommended for aqueous services. The SUS 304L Plate creates less intergranular corrosion during welding due to the less carbon and less carbide precipitation. The SS 304L Sheets are used in domestic, commercial and industrial applications where the strength and corrosion resistance are needed. The material is often used with polishing. The SS UNS S30403 Plates can come with different finishes such as electropolishing and others. The material is either hot rolled or cold rolled to produce the sheets. The 304L Stainless Steel Hot Rolled Plates are then further strengthened by solid solution annealing at elevated temperatures. Once annealed, the ASTM A240 Stainless Steel 304L Shim Sheets for pressure vessels and general corrosive applications cannot be further hardened by heat treatment. Please contact us for further information and pricing of various types of 304L plates such as the 304L SS Chequered Plate.

AISI 304L Plate Grades And Specifications

Specifications ASTM A240 / ASME SA240
Length 2000 milimeter, 2440 milimeter, 3000 milimeter, 5800 milimeter, 6000 milimeter, etc
Thickness 4 milimeter - 100 milimeter
Finish Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Width
1000 milimeter, 1219 milimeter, 1500 milimeter, 1800 milimeter, 2000 milimeter, 2500 milimeter, 3000 milimeter, 3500 milimeter, etc
Form Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Surface 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand
blast, Brush, etching, etc

Supplier Of Stainless Steel 304L Slatting Coil In Delhi, India, SS 304L Coils Specification, Buy 304L SS Chequered Plate At Factory Price.

SS TP304L Sheets Chemical Analysis

Grade S C Cr Mn Ni Si Mo P N
SS 304L 0.030 0.035 18 – 20 2 8 – 13 1.0 0.045
SS 304H 0.030 0.10 18 – 20 2 8 – 10.5 0.75 0.045

SUS 304L Plate Mechanical Properties Chart

View Check Stainless Steel 304H Plates Chemical Composition, AISI 304L Plate Mechanical properties, SS UNS S30403 Sheets Manufacturer In India.

Grade Density Tensile Strength Melting Point Elongation Yield Strength (0.2%Offset)
304L 8.0 g/cm3 Psi – 75000 , MPa – 515 1400 °C (2550 °F) 35 % Psi – 30000 , MPa – 205
304H 8.0 g/cm3 Psi – 75000 , MPa – 515 1400 °C (2550 °F) 35 % Psi – 30000 , MPa – 205

Various Types Of SS 304L Sheets

Manufacturer Of SUS 304L Plate In India, Visit our SS 304L Sheets in India, Mail Us to Get SS TP304L Sheets Free sample, Stockist Of SS UNS S30409 Plates.
Stainless Steel 304L Plates Stainless Steel 304L Plates
1.4307 Plates 1.4307 Plates
Stainless Steel 304L Slatting Coil Stainless Steel 304L Slatting Coil
SS 304L Coils SS 304L Coils
304L SS Chequered Plate 304L SS Chequered Plate
Stainless Steel 304H Plates Stainless Steel 304H Plates
AISI 304L Plate AISI 304L Plate
SS UNS S30403 Sheets SS UNS S30403 Sheets
SUS 304L Plate SUS 304L Plate
SS 304L Sheets SS 304L Sheets
SS TP304L Sheets SS TP304L Sheets
SS UNS S30409 Plates SS UNS S30409 Plates

Stainless Steel 304H Plates Equivalent Grades

Grade Equivalent Of 304L Stainless Steel Hot Rolled Plates, Ratings Of ASTM A240 Stainless Steel 304L Shim Sheets, Lowest Price Of Bulk AISI 304H Plate, Stainless Steel 304L Sheet stock.
STANDARD BS WERKSTOFF NR. GOST UNS JIS AFNOR EN
SS 304L 3304S11 1.4306 / 1.4307 03Х18Н11 S30403 SUS 304L Z3CN18‐10 X2CrNi18-9 / X2CrNi19-11
SS 304H - 1.4301 - - - - -

Stainless Steel 304L Sheets, Plates & Coils Finishes As Per ASTM A240M

Surface Finish Definition Application
2B Those finished, after cold rolling, by heat treatment, pickling or other equivalent treatment and lastly by cold rolling to given appropriate luster. Medical equipment, Food industry, Construction material, Kitchen utensils.
BA Those processed with bright heat treatment after cold rolling. Kitchen utensils, Electric equipment, Building construction.
NO.3 Those finished by polishing with No.100 to No.120 abrasives specified in JIS R6001. Kitchen utensils, Building construction.
NO.4 Those finished by polishing with No.150 to No.180 abrasives specified in JIS R6001. Kitchen utensils, Building construction, Medical equipment.
HL Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size. Building Construction.
NO.1 The surface finished by heat treatment and pickling or processes corresponding there to after hot rolling. Chemical tank, pipe

ASTM A240 Stainless Steel 304L Plate Melting Range

Plate Type Melting Point
Stainless Steel 304L Plate 1400 °C (2550 °F)

ASME SA240 Stainless Steel 304L Plate Density

Plate Type Density
Stainless Steel 304L Plate 8000 g/cm3

Plain & Polished 304L Stainless Steel Sheet

PRODUCT FINISH THICKNESS MM MAX SHEET SIZE MM
Grade 304L Plain 2B 0.9 2000 x 1000
Bright 0.9 2000 x 1000
Brushed Finish 0.9, 1.2 2000 x 1000, 2500 x 1250
Rimex Super Mirror 0.8, 1.2 2400 x 1200, 2500 x 1250
Embossed 0.8, 1.0 2500 x 1250

circle cutting in ss Grade 304L perforated sheets up to 1000mm diameter

Hole Dia mm Hole Centres mm O/A Finish Tck mm Full Sheet Size mm
0.75 1.5 23% 2B 0.6 2000 x 1000
1 2 23% 2B 1.0 2000 x 1000
1.5 2.6 30% 2B 1.0 2000 x 1000
2 3.5 30% 2B 1.0 2000 x 1000
2 3.5 30% 2B 1.0 2000 x 1000
3 5 33% 2B 1.0 2000 x 1000
4 5.6 46% 2B 1.0 2000 x 1000
5 8 35% 2B 1.0 2000 x 1000
6 8 51% 2B 1.0 2000 x 1000
8 10 58% 2B 1,0 2000 x 1000

ASTM A240 Stainless Steel 304L Plate Metric Dimensions

Plate Surface finish Thickness (mm) Width (max mm)
2B – Cold rolled, heat treated, pickled, skin passed plate 0.25–8.0 2032
2D – Cold rolled, heat treated, pickled plate 0.4–6.35 1524
2E – Cold rolled, heat treated, mechanically descaled plate 0.4–8.0 2032
2R – Cold rolled, bright annealed plate 0.25–3.5 1524
2H – Work hardened plate 0.4–6.35 1524
Polished, brushed plate 0.5–4.0 1524

ASTM A240 Stainless Steel 304L Plate Imperial Dimensions

Plate Surface finish Gauge (in) Width (max in)
2B – Cold rolled, heat treated, pickled, skin passed Plate 10–24 72*
2D – Cold rolled, heat treated, pickled plate 12–24 60
BA Mexinox only 18–28 48
Polished plate (not brushed) 11–24 60
Temper rolled plate Mexinox only 13–29 48

Stainless Steel Sheets -Type 304L | No. 2B Finish — Cold Rolled, Annealed

Stainless Steel Gauge, Width and Length Weight
Lbs. per Sq Ft.
Est. Wt. per Sheet
7GA (.1874")
48 x 96 7.871 251.9
48 x 120 7.871 314.8
48 x 144 7.871 377.8
10GA (.135”)
36 x 120 5.670 170.1
48 x 96 5.670 181.4
48 x 120 5.670 226.8
60 x 120*
5.670 283.5
60 x 144*
5.670 340.2
72 x 120* 5.670 340.2
11 GA (.120")
36 x 96 5.040 121.0
36 x 120 5.040 151.2
36 x 144 5.040 181.4
48 x 96 5.040 161.3
48 x 120 5.040 201.6
48 x 144 5.040 241.9
60 x 120 5.040 252.0
60 x 144 5.040 302.4
72 x 120* 5.040 302.4
72 x 144* 5.040 362.9
12 Ga. (.105")
36 x 96 4.410 105.8
36 x 120 4.410 132.3
36 x 144 4.410 158.8
42 x 120 4.410 154.4
48 x 96 4.410 141.1
48 x 120 4.410 176.4
48 x 144 4.410 211.7
60 x 96 4.410 176.4
60 x 120 4.410 220.5
60 x 144 4.410 264.6
72 x 120* 4.410 264.6
72 x 144 4.410 317.5
13 Ga (.090")
36 x 96 3.780 90.72
36 x 120 3.780 113.4
48 x 120 3.780 151.2
14 Ga. (.075")
30 x 120 3.150 78.75
36 x 96 3.150 75.60
36 x 120 3.150 94.50
36 x 144 3.150 113.4
42 x 120 3.150 110.3
42 x 144 3.150 132.3
48 x 96 3.150 100.8
48 x 120 3.150 126.0
48 x 144 3.150 151.2
60 x 120 3.150 157.5
60 x 144 3.150 189.0
72 x 120 3.150 189.0
72 x 144 3.150 226.8
16 Ga. (.060")
30 x 96 2.520 50.40
30 x 120 2.520 63.00
36 x 96 2.520 60.48
36 x 120 2.520 75.60
36 x 144 2.520 90.72
42 x 120 2.520 88.20
48 x 96 2.520 80.64
48 x 120 2.520 100.8
48 x 144 2.520 121.0
60 x 96 2.520 100.8
60 x 120 2.520 126.0
60 x 144 2.520 151.2
18 Ga. (.048")
30 x 96 2.016 40.32
30 x 120 2.016 50.40
36 x 96 2.016 48.38
36 x 120 2.016 60.48
36 x 144 2.016 72.58
42 x 120 2.016 70.56
48 x 96 2.016 64.51
48 x 120 2.016 80.64
48 x 144 2.016 96.77
60 x 120 2.016 100.8
60 x 144 2.016 121.0
19 Ga. (.042")
36 x 120 1.764 52.92
20 Ga. (.036")
30 x 96 1.512 30.24
30 x 120 1.512 37.80
36 x 96 1.512 36.29
36 x 120 1.512 45.36
36 x 144 1.512 54.43
42 x 120 1.512 52.92
48 x 96 1.512 48.38
48 x 120 1.512 60.48
48 x 144 1.512 72.58
22 Ga. (.030")
30 x 96 1.260 25.20
30 x 120 1.260 61.50
36 x 96 1.260 30.24
36 x 120 1.260 37.80
36 x 144 1.260 45.36
48 x 96 1.260 40.32
48 x 120 1.260 50.40
24 Ga. (.024")
30 x 96 1.008 20.16
30 x 120 1.008 25.20
36 x 96 1.008 24.19
36 x 120 1.008 30.24
48 x 96 1.008 32.26
48 x 120 1.008 40.32
26 Ga. (.018")
30 x 96 .7560 15.12
30 x 120 .7560 18.90
36 x 96 .7560 18.14
36 x 120 .7560 22.68
48 x 96 .7560 24.1
48 x 120 .7560 30.24
28 Ga. (.015")
36 x 96 .630 15.12
36 x 120 .630 18.90

Type 304L – Flattened | Long Way Of Diamond Runs Parallel To Length Of Sheet

Style Designation Size in Inches Wt. per Sq. Ft. in Lbs. Wt. Per Sheet
3/4__9 48 x 96 1.95 62.4
1/2__13 48 x 96 1.78 56.9
1/2__16 48 x 96 0.86 27.5
1/2__18 48 x 96 0.69 22.1
1-1/2__9 48 x 96 1.31 41.9
3/4__13 48 x 96 0.86 27.5
3/4__16 48 x 96 0.57 18.2
3/4__18 48 x 96 0.46 14.7
1-1/2__13 48 x 96 0.65 20.8

SS 304L Plate Weight Per Unit

Thickness Plate Weight per Unit Area Density
3/16 inches 0.06000 lbs/in²42.184176 kg/m² 0.315 lbs/in³8.72 g/cm³
1/4 inches 0.08 lbs/in²56.245568 kg/m² 0.315 lbs/in³8.72 g/cm³
3/8 inches 0.121 lbs/in²85.0714216 kg/m² 0.315 lbs/in³8.72 g/cm³
1/2 inches 0.161 lbs/in²113.1942056 kg/m² 0.315 lbs/in³8.72 g/cm³
5/8 inches 0.196 lbs/in²137.8016416 kg/m² 0.315 lbs/in³8.72 g/cm³
3/4 inches 0.235 lbs/in²165.221356 kg/m² 0.315 lbs/in³8.72 g/cm³
7/8 inches 0.274 lbs/in²192.6410704 kg/m² 0.315 lbs/in³8.72 g/cm³
1 inches 0.313 lbs/in²220.0607848 kg/m² 0.315 lbs/in³8.72 g/cm³
1 1/4 inches 0.391 lbs/in²274.9002136 kg/m² 0.315 lbs/in³8.72 g/cm³
1 1/2 inches 0.47 lbs/in²330.442712 kg/m² 0.315 lbs/in³8.72 g/cm³
1 3/4 inches 0.549 lbs/in²385.9852104 kg/m² 0.315 lbs/in³8.72 g/cm³
2 inches 0.627 lbs/in²440.8246392 kg/m² 0.315 lbs/in³8.72 g/cm³
2 1/4 inches 0.705 lbs/in²495.664068 kg/m² 0.315 lbs/in³8.72 g/cm³
2 1/2 inches 0.784 lbs/in²551.2065664 kg/m² 0.315 lbs/in³8.72 g/cm³
2 3/4 inches 0.862 lbs/in²606.0459952 kg/m² 0.315 lbs/in³8.72 g/cm³
3 inches 0.941 lbs/in²661.5884936 kg/m² 0.315 lbs/in³8.72 g/cm³

SS UNS S30403 Plate Sizes

SS 304L Plate Thickness SS 304L Plate Size SS 304L Sheet Weight per Unit Area Estimated Weight per Sheet
0.015 inches 0.381 mm 36 x 96 0.630 lbs/ft²3.07566 kg/m² 15.12 lbs6.84936 kg
0.015 inches 0.381 mm 36 x 120 0.630 lbs/ft²3.07566 kg/m² 18.90 lbs8.5617 kg
0.0178 inches 0.45212 mm 36 x 96 0.756 lbs/ft²3.690792 kg/m² 18.15 lbs8.22195 kg
0.0178 inches 0.45212 mm 36 x 120 0.756 lbs/ft²3.690792 kg/m² 22.68 lbs10.27404 kg
0.0178 inches 0.45212 mm 48 x 96 0.756 lbs/ft²3.690792 kg/m² 24.19 lbs10.95807 kg
0.0178 inches 0.45212 mm 48 x 120 0.756 lbs/ft²3.690792 kg/m² 30.24 lbs13.69872 kg
0.0235 inches 0.5969 mm 30 x 96 1.008 lbs/ft²4.921056 kg/m² 20.16 lbs9.13248 kg
0.0235 inches 0.5969 mm 30 x 120 1.008 lbs/ft²4.921056 kg/m² 25.20 lbs11.4156 kg
0.0235 inches 0.5969 mm 36 x 96 1.008 lbs/ft²4.921056 kg/m² 24.19 lbs10.95807 kg
0.0235 inches 0.5969 mm 36 x 120 1.008 lbs/ft²4.921056 kg/m² 30.24 lbs13.69872 kg
0.0235 inches 0.5969 mm 36 x 144 1.008 lbs/ft²4.921056 kg/m² 36.29 lbs16.43937 kg
0.0235 inches 0.5969 mm 48 x 96 1.008 lbs/ft²4.921056 kg/m² 32.26 lbs14.61378 kg
0.0235 inches 0.5969 mm 48 x 120 1.008 lbs/ft²4.921056 kg/m² 40.32 lbs18.26496 kg
0.0235 inches 0.5969 mm 48 x 144 1.008 lbs/ft²4.921056 kg/m² 48.39 lbs21.92067 kg
0.0291 inches 0.73914 mm 30 x 96 1.260 lbs/ft²6.15132 kg/m² 25.20 lbs11.4156 kg
0.0291 inches 0.73914 mm 30 x 120 1.260 lbs/ft²6.15132 kg/m² 31.50 lbs14.2695 kg
0.0291 inches 0.73914 mm 36 x 96 1.260 lbs/ft²6.15132 kg/m² 30.24 lbs13.69872 kg
0.0291 inches 0.73914 mm 36 x 120 1.260 lbs/ft²6.15132 kg/m² 37.80 lbs17.1234 kg
0.0291 inches 0.73914 mm 36 x 144 1.260 lbs/ft²6.15132 kg/m² 45.37 lbs20.55261 kg
0.0291 inches 0.73914 mm 48 x 96 1.260 lbs/ft²6.15132 kg/m² 40.32 lbs18.26496 kg
0.0291 inches 0.73914 mm 48 x 120 1.260 lbs/ft²6.15132 kg/m² 50.41 lbs22.83573 kg
0.0291 inches 0.73914 mm 48 x 144 1.260 lbs/ft²6.15132 kg/m² 60.49 lbs27.40197 kg
0.0355 inches 0.9017 mm 30 x 96 1.512 lbs/ft²7.381584 kg/m² 30.24 lbs13.69872 kg
0.0355 inches 0.9017 mm 30 x 120 1.512 lbs/ft²7.381584 kg/m² 37.80 lbs17.1234 kg
0.0355 inches 0.9017 mm 36 x 96 1.512 lbs/ft²7.381584 kg/m² 36.29 lbs16.43937 kg

304L Stainless Steel Sheet Stock

Steel Sheet Type Sheet Thickness Sheet Length Sheet Width Sheet Specification
304L-2B S/S SHEET .0595 0.0595 120 IN 60 AMS 5511 ASTM A240
304L-2B S/S SHEET .0595 0.0595 120 IN 48 AMS 5511 ASTM A240
304L-2B S/S SHEET .0351 0.0351 96 IN 48 AMS 5511 ASTM A240
304L-2B S/S SHEET .0351" 0.0351 120 IN 48 AMS 5511 ASTM A240
304L-2B S/S SHEET .090 0.0900 96 IN 48 AMS 5511 ASTM A240
304L-2B S/S SHEET .135 0.1350 120 IN 60 AMS 5511 ASTM A240
304L-2B S/S SHEET .135 0.1350 96 IN 48 AMS 5511 ASTM A240
304L-2B S/S SHEET .135 0.1350 120 IN 48 AMS 5511 ASTM A240
304L-2B S/S SHEET .018 0.0180 120 IN 48 AMS 5511 ASTM A240
304L-2B S/S SHEET .120 0.1200 120 IN 60 AMS 5511 ASTM A240
304L-2B S/S SHEET .120 0.1200 120 IN 48 AMS 5511 ASTM A240
304L-2B S/S SHEET .075 0.0750 96 IN 48 AMS 5511 ASTM A240
304L-2B S/S SHEET .075 0.0750 120 IN 60 AMS 5511 ASTM A240
304L-2B S/S SHEET .075 0.0750 120 IN 48 AMS 5511 ASTM A240
304L-2B S/S SHEET .1874 0.1874 120 IN 48 AMS 5511 ASTM A240
304L-2B S/S SHEET .1874 0.1874 120 IN 60 AMS 5511 ASTM A240
304L-2B S/S SHEET .0235 0.0235 120 IN 48 AMS 5511 ASTM A240
304L-2B S/S SHEET .048 0.0480 120 IN 48 AMS 5511 ASTM A240
304L-2B S/S SHEET .048 0.0480 96 IN 48 AMS 5511 ASTM A240
304L-2B S/S SHEET .105 0.1050 120 IN 48 AMS 5511 ASTM A240
304L-2B S/S SHEET .105 0.1050 96 IN 48 AMS 5511 ASTM A240

Stainless Steel 304L Plate Processing

SS 304L Plate Processing Options
2 Plasma Cutting Tables SS 304L plate can be plasma cut from 3/16″ thick thru 6.25″ thick.
4 Dynamic Waterjet  Tables SS 304L plate can be waterjet cut from light gauge sheet metal thru 8″ thick Stainless 304L Plate.
4 Kasto Plate Saws SS 304L plate or bar from 1/2″ thick thru 22″ thick SS 304L can be Kasto saw cut.
1 plate laser SS 304L sheet gauges thru 1-1/8″ thick SS 304L plate can be laser cut.
3 Plate Shears SS 304L plate thru 3/4″ thick can be shear cut to size.
Gauer Processing SS 304L sheared and edged bar can be gauer processed from 3/16″ thick thru 5/8″ thick up to 8″ wide.
Machine Cutting SS 304L rings and discs can be machine cut from 1/2″ thick thru 12″ thick, up to 42″ in diameter
Stainless 304L Plate Leveling In house plate leveling of coil from 13 gauge stainless sheet thru 3/8″ Stainless 304L Plate coil, thru 78.75″ wide (2 meter)